This 5 gallon beverage cooler is the beginning of moving away from extract syrup and towards all grain brewing.
I’ll keep using the syrup for the bulk of my fermentable sugars since I only got about 50% efficiency on this first mash. But that’s ok because we added a pound and a half of honey to make up for it. I doubt the honey flavor will come through the dark malts and all the hops in this recipe, but it will up the alcohol a bit. This is my biggest beer yet, so I have no idea how long it will take before its drinkable (hopefully it takes less than 6 months to condition).
Mash:
5 lb British mild ale/stout malt (2.5o L)
1 lb Crystal (90o L)
0.5 lb
1 lb Chocolate malt (British)
1 lb oat flakes
0.5 roasted barley
I added in 4 gallons (half bottled water, half tap water) of water (165o F?) and the mixture stabilized at 151o F. After an hour, I added a half gallon of boiling water to thin out the mash and up the temperature a bit, and then started draining into the brew pot. I did a batch sparge with 165o F water (forgot to write down the volume, 2 gallons?) to make sure I got as much sugar out as possible. The gravity of this was around 1.026.
Boil Schedule:
Bittering hops (60 minutes): 1 oz Chinook plugs @14% alpha acid
Flavoring hops (30 minutes): 2 oz Northern Brewer pellets @ 6% alpha acid
For the last 15 minutes of the boil, I added 4 lbs Alexanders Pale Extract (liquid), 1.5 lbs of Greg’s honey (Doylestown wild flower?) and about 2 tsp of yeast nutrients.
Aroma hops (10 minutes): 1 oz Cascade plugs @ 8.7% alpha acid
O.G. 1.075
The boil may have lasted longer than 60 minutes, so this may be a pretty bitter brew. We're at the upper end of the bitter scale with about 100 IBUs and at the low end of the gravity scale. Should be an interesting beer.